Auto Paintless Dent Removal Kit - Car Dent Repair Tools with Suction Cup Dent Puller, Dent Remover, and Complete Tool Kit for Automotive Body Repair

Car Dent Repair Tools Auto Paintless Body Dent Removal Kits Automotive Dent Remover Suction Cup Dent Puller Tool Kit for Car

Description: Revolutionize your car's appearance with our Auto Paintless Dent Removal Kit. Crafted from durable ABS and metal, this tool kit ensures effective dent repair without harming painted surfaces. The kit includes various accessories like pulling bridges, glue gun, and tabs for comprehensive dent removal. Suitable for sheet metal processing in automobiles, refrigerators, motorcycles, and more, this kit is a must-have for every car owner.

How to Use:

1. Clean the damaged surface with a wet cloth.
2. Insert the glue stick into the gun, connect the power source, and preheat for 5-10 minutes.
3. Pull the trigger and apply the suitable drawing gasket with extruded glue (Note: The larger the drawing gasket, the larger the drawing force).
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until it sticks (Allow the glue to cool for about 5-8 minutes, shorter in winter).
5. Align the T-shaped repairer, press the drawing gasket with hot melt glue, and pull the sliding rod backward to lift the dent.
6. After dent removal, clear the glue with alcohol using a plastic shovel.
7. If the dent still exists, gently knock it with a flattening hammer with Tapdown head.
8. Repeat the above steps until the dents are fully repaired.

FAQs:

Question 1: The glue is not strong; it is debonded. What is the reason?

1. The viscosity of hot melt adhesive is temperature-dependent. The ideal temperature is 20°C-28°C.
   • Note: Avoid operating under direct sunlight in summer; winter temperature should be above 10°C (pouring hot water on the wagon in the recess can help in very cold weather).
2. If the car has been waxed, plated with crystal film, or the recess material is not iron sheet, tape stickiness may be affected.
3. Dust on the product during use can impact adhesion. Clean the rubber strip, dent surface, and gasket with alcohol before use.
4. Degumming at the ideal temperature is normal; repeat the operation if needed. If the depression cannot be repaired, it may be unsuitable for this tool.

Question 2: How to remove the glue

• Use alcohol above 95 degrees, tear it again, and spray alcohol. Residual glue can be removed with fingernails. Asphalt, gasoline, or diesel can also be used.
  • Note: Purchase alcohol locally due to flammability.

Note:

1. Not recommended for use on waxed or coated surfaces.
2. Ensure the dent is accessible for tool use.

#DentRemoval #AutoBodyRepair #CarRepairKit #PaintlessDentRepair #AutomotiveTools #DIYCarCare #SuctionCupPuller #DentRemoverKit #DIYAuto #CarMaintenance